Speedlite Accessory

Canon Speedlite EL-10

Specifications

Specifications

  • Bounce head

  • LCD Panel

  • Electronic dial

  • Catchlight panel

  • Wide panel

  • 21-pin multifunction shoe

  • Menu direct button

  • Stand

Specifications in detail

Power

  • Guide Number (ISO100) Meters
    40

Zoom

  • Zoom Head
    Auto/Manual
  • Coverage with Wide Panel
    14mm
  • Auto Zoom for Sensor Size
    Yes

Flash Modes

  • Auto Exposure Control
    E-TTL II / E-TTL
  • High Speed Sync (FP)
    Yes
  • Manual / Output Settings
    Yes - 1/1 to 1/1024
  • Manual Steps
    1/3-stops
  • Continuous Flashes in a Burst
    Maximum at full power: Approx. 651
  • Strobe / Output Settings
    Not supported
  • Stroboscopic Frequency
    Not supported

Flash-Related Function

  • FE Lock
    Yes
  • FE Memory
    Yes
  • Flash Exposure Compensation
    ±3 stops
  • Flash Exposure Bracketing
    ±3 stops
  • Second-Curtain Flash Sync
    Yes (including wireless)2
  • Modelling Flash
    No (supported as off-camera receiver unit only)3
  • Modelling Lamp
    No
  • Colour Temperature Info Communication
    Yes

Wireless Flash

  • Transmitter
    Yes
  • Transmission Type
    Radio only
  • Transmitter Range
    30m (approx.)4
  • Receiver
    Yes
  • Max. Number of Transmitters / Receivers
    15 / 15 (16 in total of any combination)
  • Number of Groups
    5 (A/B/C/D/E)
  • Number of Channels
    Auto, 1-15
  • Remote Shutter Release
    Yes

Flash Head Movement

  • Up
    45, 60, 75, 90, 90 °
  • Down
    0 °
  • Left
    60, 75, 90, 120, 150 and 150 °
  • Right
    60, 75, 90, 120, 150 and 180 °

AF Assist

  • AF-Assist Beam
    Flash strobe
  • Number of AF Points Supported
    n/a

Power Source

  • Battery
    4 x AA batteries5
  • Battery Level Indicator
    No
  • Minimum Recycling Time
    Approx. 0.1-2.56, 7
  • Number of Flashes (Fully Charged Battery)
    210-14008
  • External Power Supply
    No

Construction

  • Dust and Water Resistance
    No
  • Active Cooling
    No
  • Mounting Foot Material
    Multi-Function Shoe9

Miscellaneous

  • Custom Function
    11 x C.Fn / 8 x P.Fn
    (plus 3 x Custom Modes (C1, C2, C3))
  • Flash Settings from Camera Menus
    Yes10 - On-flash Menu Direct button
  • External Flash Exposure Sensor
    No
  • PC Terminal
    No
  • Accessories (Included)
    Speedlite Case
    Mini Stand
    Mounting foot cover
  • Accessories (Optional)
    Speedlite Transmitter ST-E10 (Multi-Function foot)
    Speedlite Transmitter ST-E3-RT (Ver.2) (Standard 5-pin foot)
    EX series Speedlites with radio receiver function

Physical Specifications

  • Dimensions (W x H x D)
    Approx. 70.6 x 116.3 x 98.3 mm
  • Weight
    287
  1. When using new AA/LR6 alkaline batteries, based on Canon standards and set to manual flash. Continuous flash count at full output until flash firing restriction Level 1.
  2. With compatible cameras/devices and not available with stroboscopic shooting.
  3. Modeling flash cannot be used when mounted on a camera
  4. Without any obstructions between sender and receiver, and without external radio interference. Arrangement of units and other external factors may affect the range/performance.
  5. LR6 alkaline or HR6 Ni-MH type batteriescan be used. FR6 lithium batteries cannot be used.
  6. When using new AA/LR6 alkaline batteries, based on Canon standards and set to manual flash. Continuous flash count at full output until flash firing restriction Level 1.
  7. 1/1024 to 1/1 power charging time required for firing.
  8. When using new AA/LR6 alkaline batteries, based on Canon standards and set to manual flash. Continuous flash count at full output until flash firing restriction Level 1.
  9. For use with compatible cameras with Canon's Multi-Function shoe, a firmware update may be required. Note, not all functions may be supported with all cameras (the EOS R5 C and camcorders with the Multi-Function shoe are not supported).
  10. With compatible cameras.