This section describes the basic procedure for sending scanned documents to a computer that acts as a file server on a network. For information on the required settings to be made beforehand, refer to the related information.

1. Place your originals.

2. Press (Main Menu).

3. Use [ ] , [ ] or (Scroll Wheel) to select <Send/Fax> or <Scan to Store>, then press [OK].

If you select <Scan to Store>, use [ ] , [ ] or (Scroll Wheel) to select <Store on File Server>, then press [OK].

4. Use [ ] , [ ] or (Scroll Wheel) to select <Enter File Server (New)>, then press [OK].

5. Use [ ] , [ ] or (Scroll Wheel) to select <Windows (SMB)> or <Windows (SMB) : Browse>, then specify the file server's address.

• Select <Windows (SMB)> if you want to enter the file server address directly.

• Select <Windows (SMB) : Browse> if you want to browse and specify the file server on a network.

6. Make the scan settings you require.

7. Press (Start).

• Scanning starts if the original is placed in the feeder, and the scanned data is sent to the specified destination when scanning is complete.

• To cancel scanning, press the left Any key to select <Cancel> or press (Stop).

8. Use [ ] , [ ] or (Scroll Wheel) to select the original size, then press [OK].

9. Press (Start).

• Scanning starts.

• To cancel scanning, press the left Any key to select <Cancel> or press (Stop).

10. Follow the instructions on the display, then press (Start) once for each original.

11. When scanning is complete, press the right Any key to select <Done>.

The scanned data is sent to the specified destination.