FAQ ID: 8202100500
Release date: 01 August 2014
Before connecting this printer to the network, confirm the following two items, (A) and (B).
(A) Access point or router (supporting IEEE802.11b/g/n)
An access point or router is a relay device which connects not only the Internet and network devices such as a computer or printer, but also one network device to another.
So, your access point or router must be properly set before you go to the next setup step.
(B) The computer to be used with the printer must be connected to the network.
In order to confirm whether the computer to be used with the printer is connected to the network, try to browse the Internet website from the computer.
In most cases, you can use the printer in wireless connection using this setup method.
Before Starting Wireless Connection Setup
1. If the HOME button (A) on the printer is lit, touch the HOME button.
2. Flick the screen left or right, then tap the [ WLAN ].
Tap [ Wireless LAN setup ].
The Wi-Fi lamp (B) flashes when wireless connection is enabled.
3.
When the screen left above is displayed, go to the step 4.
When the screen right above is displayed, go to the step 5.
4. Tap [ To other connection methods ] on the printer.
5. Tap [ Standard setup ].
6. Tap your access point.
7. Either of the following screens should be displayed:
If [ Connected to the access point. ] appears on the printer, the network does not require a password.
8. Tap the screen.
9. Enter the network password (WEP key or passphrase).
Character entry is case-sensitive so be sure to confirm.
10. Tap [ OK ].
11. Make sure that the network password is correct.
Character entry is case-sensitive.
12. Tap [ OK ].
13. When the left screen appears, tap [ OK ].
The wireless LAN setup in the standard method is completed.
Install the software.
-> [ How to install the software from the Setup CD or from the Setup & Manual site (wireless LAN connection) ]
- When you have only one access point.
Select [ Use one AccessPoint only ], then tap [ OK ].
Select the MAC address of the target access point on the displayed screen.
For details on how to check the MAC address of the access point, refer to the access point manual or contact its manufacturer.
- When using multiple access points
Tap [ Use multiple AccessPoints ].
When the access point or the router you are using supports the WPS function, you can use this setup method to connect the printer in a wireless connection.
Confirm that the access point or the router you are using has the WPS button.
Before Starting Wireless Connection Setup
1. If the HOME button (A) on the printer is lit, touch the HOME button.
2. Flick the screen left or right, then tap the [ WLAN ].
Tap [ Wireless LAN setup ].
The Wi-Fi lamp (B) flashes when wireless connection is enabled.
3.
When the screen left above is displayed, go to the step 4.
When the screen right above is displayed, go to the step 5.
4. Tap [ Start setup ] on the printer.
-> Go to 7.
5. Tap [ WPS (Push button method) ].
6. Tap [ OK ].
7. Press and hold the WPS button on the access point.
8. Tap [ OK ] on the printer within 2 minutes.
9. When the left screen appears, tap [ OK ].
The wireless LAN setup using WPS is completed.
Install the software.
-> [ How to install the software from the Setup CD or from the Setup & Manual site (wireless LAN connection) ]