Wired LAN connection of your printer to an access point
FAQ ID: 8202100600
Release date: 17 September 2014
Details
Helpful Information
Solution
Wired Setup
Before Configuring Wired Settings
REFERENCE
Make sure that the printer is turned on.
1. You will need an Ethernet cable (sold separately).
2. Remove the Cap (A) from the port located on the left side at the back of the printer.
3. Connect the printer and a network device (router, etc.) with an Ethernet cable (B).
ATTENTION
Do not connect to any other port.
4. If the HOME button (C) on the printer is lit, touch the HOME button.
5. Flick the screen left or right, then tap [ Setup ].
6. Flick the screen up or down, then tap [ Device settings ].
7. Tap [ LAN settings ].
8. Tap [ Change LAN ].
9. Tap [ Wired LAN active ].
10. Touch the HOME button.
The wired LAN setup is completed.
Install the Software.
-> [ How to install the software from the Setup CD or from the Setup & Manual site (wired LAN connection) ]
Applicable Models
- PIXMA MG7540
- PIXMA MG7550