FAQ ID: 8200347400
Release date: 11 September 2008
Clean the Print Head if lines are missing or if white streaks appear in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the Print Head causes used ink to be absorbed in the ink absorber. Cleaning the Print Head consumes ink, so perform Print Head Cleaning only when necessary.
1. Make sure that the machine is turned on, and then load a sheet of A4 or Lettersized plain paper in the Rear Tray or Cassette.
2. Open the Paper Output Tray, and then open the Output Tray Extension.
2-1. Press the Open button to open the Paper Output Tray.
2-2. Open the Output Tray Extension.
3. Press the Feed Switch to select the paper source where you have loaded paper.
4. Start Print Head Cleaning.
4-1. Press the Menu button.
4-2. Use the or button to select Maintenance/settings, then press the OK button. The Maintenance/settings screen is displayed.
4-3. Use the or button to select Maintenance, then press the OK button. The Maintenance screen is displayed.
4-4. Use the or button to select Cleaning, then press the OK button.
The confirmation screen is displayed.
4-5. Use the or button to select Yes, then press the OK button. Print Head Cleaning starts.
Do not perform any other operations until Print Head Cleaning finishes. This takes about 1 minute.
The pattern print confirmation screen is displayed.
4-6. Use the or button to select Yes, then press the OK button.
The nozzle check pattern is printed.
5. Check the print head condition with the printed nozzle check pattern, and take appropriate action.
See [ Printing the Nozzle Check Pattern ].