FAQ ID: 8200265400
Release date: 19 August 2008
If your access point supports WPS (Wi-Fi Protected Setup), you can set the wireless LAN security easily.
1. Use the Easy-Scroll Wheel (A) or the or button to select Settings, then press the OK button.
2. Select Device settings, then press the OK button.
3. Select LAN settings, then press the OK button.
4. Select Change wireless/wired, then press the OK button.
5. Select Wireless LAN active, then press the OK button.
6. Select Wireless LAN settings, then press the OK button.
7. Select WPS settings, then press the OK button.
8. Select Push button method, then press the OK button.
9. Press the OK button.
10. When the access point is ready, press the OK button on the machine, then press the WPS button on the access point within two minutes.
The completion screen appears on the LCD of the machine, then the LAN settings screen returns.
1. Press the ON button (A) to TURN OFF THE MACHINE.
2. Turn on the computer, then insert the
Setup CD-ROM into the CD-ROM drive.
The setup program should run automatically.
3. AutoPlay screen appears, click Run Msetup4.exe.
4. User Account Control screen appears, click Continue.
If the same screen reappears in subsequent steps, click Continue.
5. When the Select Your Place of Residence screen appears, select your place of residence, then click Next.
6. Click Easy Install.
The drivers, application software, and on-screen manuals are installed automatically.
7. Click Install.
Move the cursor over items to display explanations.
8. Read the License Agreement screen carefully and click Yes.
Installation starts.
1. Press the ON button (A) to TURN ON THE MACHINE.
2. On the Setup Method screen, select Printer is already connected to the network, then click Next.
3. When the Printers screen appears, make sure that the machine is selected and click Next.
- Windows Vista:
Go to Step 5
- Windows XP/2000:
Go to Step 4
4. Windows XP/2000
When the Network Setup of the Card Slot dialog box appears, specify the drive letter, then click Next.
5. When the Setup Completion screen appears, click Finish.
2. Click Next.
It may take a while for the next screen to appear. Click Next only once.
3. Click Next.
If connected to the Internet, the user registration page appears. Follow the on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine.
4. When the Extended Survey Program screen appears, confirm the message. If you can agree,click Agree.
If you click Do not agree, the Extended Survey Program will not be installed. (This has no effect on the machine's functionality.)
5. Click Exit.
If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart.
After restarting the computer, remove the Setup CD-ROM and keep it in a safe place.
2. Turn on the computer, then insert the Setup CD-ROM into the CD-ROM drive.
3. Double-click the Setup icon.
If the CD-ROM folder does not open automatically, double-click the CANON_IJ icon on the desktop.
4. Enter your administrator name and password. Click OK.
If you do not know your administrator name or password, click Help, then follow the on-screen instructions.
5. When the Select Your Place of Residence screen appears, select your place of residence, then click Next.
6. Click Easy Install.
The drivers, application software, and on-screen manuals are installed automatically.
7. Click Install.
Move the cursor over items to display explanations.
8. Read the License Agreement screen carefully and click Yes.
Installation starts.
9. When the Load plain paper into the cassette screen appears, load plain paper in the Cassette (A) and click Next.
10. Click Next.
11. Click Next.
If connected to the Internet, the user registration page appears.
Follow the on-screen instructions to register your product.
You will need your product serial number, which is located on the inside of the machine.
12. Click Restart.
When the computer restarts, Canon IJ Network Tool starts automatically.
Click Restart to restart the computer.
After restarting the computer, remove the Setup CD-ROM and keep it in a safe place.
1. On the Canon IJ Network Tool screen, select LAN connection, then click OK.
2. If the Setup Preparations dialog box appears, confirm that preparation is complete, then click OK.
3. Select Setup in the pop-up menu, then click Register Printer.
4.
When the Cancel Setup screen appears, then click Cancel.
The Printer Setup Utility and Canon IJ Network Scanner Selector will start up.
1. Mac OS X v.10.4.x/v.10.3.9
When the Printer List screen appears, click Add.
Mac OS X v.10.4.x:
Go to Step 2
Mac OS X v.10.3.9:
Go to Step 3
2. Mac OS X v.10.5.x/v.10.4.x
Wait for a while, then select Canon **** series and click Add.
In Mac OS X v.10.4.x, click More Printers in the Printer Browser screen.
- Mac OS X v.10.5.x:
Go to Step 5
- Mac OS X v.10.4.x:
Go to Step 3
3. Mac OS X v.10.4.x/v.10.3.9
Select Canon IJ Network in the pop-up menu, select your machine's name in the list of printers, then click Add.
4. Mac OS X v.10.4.x/v.10.3.9
Confirm that your machine's name is added to the list of printers.
5.
On the Canon IJ Network Scanner Selector screen, select Canon **** series Network in TWAIN Data Source Name and the MAC address of the machine in Network Device List, then click Apply to use the machine as a scanner.