When using the [Self-Timer], you can set a 10-second or 2-second delay for shooting after the shutter button is pressed. This section describes how to set and cancel the [Self-Timer].

Setting Self-Timer to 10 seconds or 2 seconds

1. Press the <Power> button on the camera.

2. Press the <Self-Timer> button ().

3. The following screen appears.

Operate the <directional buttons> to select [10 sec. Self-Timer] () or [2 sec. Self-Timer] ().
Confirm that the [Self-Timer] setting you selected appears.

4. If the following icon appears on the LCD monitor*, this setting is completed.

* The icon display location differs depending on the model being used.

Canceling the Self-Timer

5. Press the <Self-Timer> () button, and the following screen appears.

Operate the <directional buttons> to select the [Self-Timer Off] ().
Make sure to select [Self-Timer Off].

6. If the self-timer icon is not displayed*, then the [Self-Timer] setting has been cancelled.

* The icon display location differs depending on the model being used.

This completes the process of setting the self-timer.
If you want to make an optional time setting in [Self-Timer], please see the following section.
Setting the Self-Timer (Changing the Delay Time and Number of Shots)

• Digital IXUS 100 IS
• Digital IXUS 95 IS
• Digital IXUS 990 IS
• PowerShot A1100 IS
• PowerShot A2100 IS
• PowerShot D10
• PowerShot SX200 IS