FAQ ID: 8200725800
Release date: 26 February 2010
Raise the [ISO speed] to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area.
1. Press the <Power> button on the camera.
2. The following screen appears on the LCD monitor.
Touch [FUNC.] ().
3. The following screen appears on the LCD monitor.
Drag the screen up or down to select the [ISO AUTO] ().
Touch [AUTO].
4. Select the [ISO Speed].
Drag the screen up or down to select an [ISO Speed]* of your choice.
After the selection is made, touch [ ].
* The appropriate [ISO Speed] differs depending on shooting locations. If the camera shake warning icon () appears when you press the <Shutter Button> halfway, it is recommended to gradually raise the ISO speed in increments such as [ISO 80], [ISO 100], etc., and then set the [ISO Speed] when the camera shake warning icon () disappears.
Changing the ISO speed | |
---|---|
Automatically adjusts the ISO speed to the Shooting mode and shooting conditions. | |
Fine weather conditions, outdoor shooting. | |
Cloudy, Twilight | |
Nightscapes, Dark interiors |
5. If the following icon is shown, the setting is complete (if setting [ISO Speed] to 400).