Lenses for DSLR
Canon EF 100-400mm f/4.5-5.6L IS II USM
SpecificationsSpecifications in detail
Optical Features / Specifications
- 35mm Film Equivalent Focal Length (mm)
-
- Angle of View (Horizontal, vertical, diagonal)
20° - 5°10', 14° - 3°30', 24° - 6°10'
- Lens Construction (Elements/Groups)
21/16
- Number of Diaphragm Blades
9
- Minimum Aperture
32-38(40)¹
- Closest Focusing Distance (m)
0.98
- Maximum Magnification (x)
0.31(at 400mm)
- Distance Information
Yes
- Image Stabilizer OIS1
4-stops¹
- AF Actuator
Ring USM¹
Accessories
- Lens Cap
E-77II
- Lens Hood
ET-83D
- Lens Case/Pouch
LZ1326
- Rear End Cap
Lens Dust Cap E
- Magnification with Extension Tube EF12 II
0.38-0.03
- Magnification with Extension Tube EF25 II
0.46-0.07
- Other Accessories
-
Specifications with 1.4x Extender
- Maximum Magnification
0.44 at 400mm
- AF Possible
Yes¹
- Image Stabilizer
Yes¹
Specifications with 2x Extender
- Maximum Aperture
6.3-45 (8-57 at 400mm)
- Image Stabilizer
Yes¹
Physical Specifications
- Filter Diameter (mm)
77
- Max. Diameter x Length (mm)2
94x193
- Weight (g)
1640 with tripod mount
*Lenses with dust/moisture resistance are fitted with a rubber ring on the lens mount which may cause sligth abrasion of the camera mount.
This in no way effects either the lens or camera performance.
*Lenses with dust/moisture resistance are fitted with a rubber ring on the lens mount which may cause sligth abrasion of the camera mount.
This in no way effects either the lens or camera performance.
*Lenses with dust/moisture resistance are fitted with a rubber ring on the lens mount which may cause sligth abrasion of the camera mount.
This in no way effects either the lens or camera performance.
¹ Minimum aperture if using 1/3stop increments
¹ Tested under CIPA standards
¹ Full time Manual focus
¹ AF possible only with EOS-1 series, 7D Mark II, 5D Mark III (with firmware 1.2.1) and EOS 80D.
¹ IS will not work with the following cameras EOS-1, EOS 5, EOS 100, EF-M, EOS 1000/F/n/Fn, EOS 700, EOS 10, EOS RT, EOS 600/630, EOS 850, EOS 750, EOS 620, EOS 650
¹ Minimum aperture if using 1/3stop increments
¹ Tested under CIPA standards
¹ Full time Manual focus
¹ AF possible only with EOS-1 series, 7D Mark II, 5D Mark III (with firmware 1.2.1) and EOS 80D.
¹ IS will not work with the following cameras EOS-1, EOS 5, EOS 100, EF-M, EOS 1000/F/n/Fn, EOS 700, EOS 10, EOS RT, EOS 600/630, EOS 850, EOS 750, EOS 620, EOS 650
¹ Minimum aperture if using 1/3stop increments
¹ Tested under CIPA standards
¹ Full time Manual focus
¹ AF possible only with EOS-1 series, 7D Mark II, 5D Mark III (with firmware 1.2.1) and EOS 80D.
¹ IS will not work with the following cameras EOS-1, EOS 5, EOS 100, EF-M, EOS 1000/F/n/Fn, EOS 700, EOS 10, EOS RT, EOS 600/630, EOS 850, EOS 750, EOS 620, EOS 650
- Tested under CIPA standards
- Lens dimensions when in retracted state